All products are original designs by inventor Steven J. Frey and are made to order in the USA. Currently we are not shipping products outside the US. New products are being added as they are developed. Be sure to check back often!

Send questions and comments to

Hoffman Super Safety MIL-SPEC Trigger
Go/No Go Gauge

We do not manufacture or sell the Super Safety.
We do not provide 3D printer files for the Super Safety.

  • 3D printed gauge works like a 3D puzzle. The MIL-SPEC trigger will only fit in the puzzle if the right shape has been removed (sanded, filed or machined) from the tail of the trigger.
  • Gauge test fits trigger modifications for both the 2 (single cam) and 3 (dual cam) position Super Safetys.
  • Physical part. Color may vary.
  • Does NOT include a trigger.
  • Does NOT include a Super Safety device.
  • Made in the USA.
  • Complete information (including 3D printable models) about the Hoffman Super Safety can be found here.


No extra clips or tabs to get in the way.
Muzzle does not hit the table.

Click for larger image

Stable on its own, but can also be mounted to bench if desired.
Click for larger image

Choice of colors.
Click for larger image

Custom colors available.
Contact us for information.

AR-15 Cleaning Rest

  • Portable, compact, light weight (10.4 ounces), yet totally stable
  • Allows you to set the angle of your choosing without the end of the barrel hitting your bench or hanging over the edge
  • No extra clips or tabs to get in your way while cleaning
  • Can be mounted to your bench with 1/4" carriage bolts, hex head bolts, lag screws, or C-clamps (hardware not included)
  • Made in the USA
  • US Patent Pending


Fits on a standard 2x4 wall stud.

Wall bracket

Optional mag holder secures with pressure senstive tape.

AR-15 Wall Mount

  • Mount within sight, or hidden from view behind doors and furniture, even on the back of the door.
  • Mount inside a closet behind your clothes.
  • Mount INSIDE a wall!
That's right, you can mount this INSIDE a wall!

The bracket is perfectly sized to mount to a standard 2x4 wall stud. Just cut a hole in the drywall, install the bracket, clip the rifle in place and cover it up with some artwork or piece of furniture. 

  • Firearm clips securely in place and is released by pressing the mag release. Can also be modified to not lock in place if desired.
  • Optional magazine holder attaches with pressure sensitive tape
  • Mounts with 4 screws (not included)
  • US Patent Pending
  • 100% made in the USA

$49.99 with optional mag holder


Thumb Saver / Loader
Hi-Point 995 9mm Carbine

  • Fits factory and aftermarket 9mm magazines
  • Ambidextrious operation
  • Integrated magazine stripper
  • US Patent Pending
  • 100% made in the USA

Semi-soft Right Hand as shown
Click for larger image

Hard Right Hand as shown
Click for larger image

All grips come with hardware and tool
(Hard Ambidextrous as shown)

Rough Rider Grips

Ergonomically Contoured Non-slip Grips for Rough Rider .22 LR / .22 WMR. Features special textured, oil-resistant, non-slip surface, with a 'Damascus' pattern. No other grips on the market offer this US Patent Pending, non-slip surface:
  • Right-hand grip includes special ergonomic finger contours on the left side only.
  • Left-hand grip includes special ergonomic finger contours on the right side only.
  • Ambidextrous grip does NOT include finger contours.
  • Screws and nuts can be installed from either side. (Shooter's preference)
  • Hard grips made from environmentally friendly Polylactic Acid, a thermoplastic polyester monomer derived from fermented plant starch from renewable sources such as corn, cassava, sugarcane and sugar beet pulp.
  • Rubber-like Semi-soft grips made from advanced Thermoplastic Polyurethane.
Hard grips include:
  • One (1) left side grip, (1) right side grip, (1) screw, (1) nut, and (1) hex L-key.
Semi-soft grips include:
  • One (1) left side grip, (1) right side grip, (1) rigid spacer, (2) screws, (2) nuts, and (1) hex L-key.

100% made in the USA.

$24.99  Hard Grips
$29.99  Semi-soft Grips

The Best D-cell Maglite Holder

Simply put, this is the best wall bracket you will find for your D-Cell Maglite flashlight.
  • Securely mounts your flashlight in the VERTICAL position with a single screw (not included).
  • Sized perfectly to fit the width of a 2x4
  • Made from rock solid polymer from renewable sources
  • Made in the USA
  • US Patent Pending
What else can we say, other than you can have any color you want, as long as it is black.
Flashlight NOT included (obviously)


US Patent USD622941S1

Coming Soon! Range Hat

There is much discussion  to be found on the internet regarding the pros and cons of shooting with one or two eyes open. We will not attempt to join in the argument, but closing one eye introduces tension in your facial muscles. Also, shooters that are cross-hand dominate may find it diffucult to shoot with either eye!

The solution is our patented Bullseye Shooting Sports TM Range Hat. You are going to wear a hat on the range anyways, so why not wear the only hat that provides you with a built in eye patch?

  • Fully integrated eye patch system

  • Keep both eyes open while sighting to reduce tension

  • Available for left or right hand shooters

  • Can be worn with or without glasses

  • Patch folds inside hat when not in use

  • Made in the USA

  • US Patent USD622941S1